Crafts and DIY, Sewing

Where is Your Bonnet?

As a mother of a daughter, who has long curly hair, the aforementioned question is part of my nightly bedtime routine. It goes something like, “put your pajamas on, brush your teeth, put on your bonnet, and get in the bed.” After my daughter gets three of the four steps right, I usually find her in bed with her hair sprawled across the Hello Kitty on her pillow. Inevitably we have the same Q&A. “Where is your bonnet?” “Did you look in the bathroom?” Sometimes I just let her use mine.

When you have curly hair or fine hair a satin sleep bonnet is part of the protective line of defense against breakage and dryness. Satin lined bonnets can be expensive, as most things marketed toward curly hair are. This is extremely frustrating if you have to replace them due to wear or loss.

Recently I found a tutorial that showed how to make a diy satin lined bonnet with 1/2 a yard of your favorite fabric and 1/2 yard of satin. In my stash I had 3/4 of a yard of this remnant fabric from Hancock’s Going Out of Business Sale.

My rationale was if I make a bonnet she loves maybe she’ll keep up with it. I followed the tutorial by Kandra, Easy DIY Reversible Hair Bonnet Tutorial (African Print). The instructions were really easy. I used a 22 X 22 rectangle fold because I was sewing for a child. I cut an 11 inch semi circle cut on the quarter fold.

I then used that cotton fabric to cut the blue satin static free liner. I pinned it right on top, making sure to line up corners, selvedges, and folds.

When opened you have two circles. Sew them right sides together and your in the home stretch.

I used a serger marking my stopping point, an opening marked by two red pins crossed in an X. I turned the circles right sides out and created the 1/2 inch wide sleeve with my sewing machine. I used my bodkin +safety pin technique to thread the elastic.

I closed the seam and stretched the elastic to shape the bonnet. Voila! Here is the finished product.

It took me less time to make it than it would if I would have ran to the local Walmart and been “peer pressured” into self checkout. She loves it! My hope is that she’ll wear it and keep up with it. Keep me in prayer. Only time will tell.

Sewing

Steal that Look: Simplicity 2369 Pants

Spring is finally here but based on the 55 degrees outside I have not yet pulled out the Spring Wardrobe. I did want to make something spring like despite the wet and cold weather. When I came across this polyknit fabric at my local Walmart, I knew immediately they would make a beautiful pair of palazzo pants. It also seems like flowers on pants is back in fashion this spring.

I had this pattern in my stash but had never sown the pants. After reading the reviews I decided to make the finished size based on my hip measurements. The pattern was easy to cut; it was two pieces, one front and one back.

The steps to sew the pattern were exactly the same as the steps for the pattern for the Simplicity pajama pants. The back piece is slightly wider than the front, which gives you good seat room. With right sides together I assembled each leg at the inner seam.

The next part of the directions was written very poorly. I rewrote it on my pattern to say, “Open each leg and put one on top of the other, right sides together.) I then serged the u shape.

They were finally coming together! This is the halfway mark! I flipped the pants so that they looked like a pair turned inside out. I then serged the two side seams.

I followed the instructions to finish the waistband using a tool called a bodkin to thread my 1 1/2 inch elastic. I chose a wide elastic that wouldn’t roll. I also topstitched the casing with a red thread to add a decorative detail.

When all was said and done the pants looked so good! They weren’t as wide as palazzo pants, but they were wide enough. I saw a similar pair of pants at Macy’s.

They retail at 125.00!

Here is my version.

Mine cost me a whopping 8.00.

What do you think? Have you stole a look lately and saved yourself major money? Comment below. Thanks for reading.

Sewing

Simplicity 1064 Pattern Review

Hello friends:

I don’t what the weather has been like for you this winter. It has been quite chilly here in North Carolina this month. I wanted and needed something warm to wear to work, so I rummaged through my stash and chose a sweater knit with a bold pattern for this project. Based on several reviews, I decided to pair my knit fabric with this pattern by Simplicity.

Simplicity 1064 Pattern Description:
Misses’ easy to sew tunics with length variations and tie belt. This versatile mock wrap tunic pairs well with leggings for an easy on trend look. Make it with a long sleeve, short sleeve or sleeveless with a front flounce.

Fabric Used:
Exact description: Bright Red/Cream/Black Scroll Print Poly/Lycra Hacchi Sweater Knit

Pattern Sizing:
Size: 6-8-10-12-14, 14-16-18-20-22

Based on the finished garment measurements I chose to cut a 14.

I generally trace my patterns on freezer paper. I use a warm iron (no steam) to temporarily adhere the pattern to the fabric.

I knew I would love this tunic just by laying out the skirt pieces!
D8451518-7123-4726-A0B4-DCC3AB5AD70A
The instructions were easy enough for an advanced beginner; however, the instructions for the facing weren’t very clear. There are also two darts involved.

When it was done, I think the garment looked better than the picture. I say this because my version wasn’t sheer like a beach cover up.

I didn’t like that the finished pattern was a size bigger than projected. I also didn’t care for how the elastic insert called for a safety pin. I have done this method for pajamas but the casing was wider at 1-1 1/2 inches. I managed to lose the safety pin on try #1 when it detatched from the elastic. Then on try #2 the safety pin popped open inside the narrow casing. I had to get a seam ripper to retrieve the pin. On try #3, I found a great tool called a ball point botkin, and used it to thread the elastic through the casing. This botkin made threading super fast.

Do you know after all of that threading, I found I didn’t like the elastic waist? Sigh 😔. The waist felt bulky despite having been trimmed. I took the casing apart and decided to make a sash belt. The picture below is before I made the sash belt. For my version of B, I also altered the sleeves to have flounces using the method featured here by Pamela Erny.

I plan on sewing this pattern again in a poly satin, but I’ll have to buy the pattern again in the smaller size group. This garment has a lot of ease built in. I used a knit based on reviews of so many others. Although I used a knit and the finished garment measurements to decide what size to cut, the final garment was too big. I will have to go down another size for a better fit.

My final thoughts: The finished garment is beautiful and comfy but a whole size too big. Thank goodness for sash belts and darts.

Crafts and DIY, Sewing

Creating a Community among Children

Transition and major life change can be hard on families, especially children. So, often as adults we persevere through life's challenging events accepting them as a part of our lot. Yes, we may question God, swear at the obstacle, murmur and complain, but somehow we overcome and pull through. Human will is amazingly creative and resilient!

Children go through those obstacles too! As adults and parents we often set the example for our children of how to act and endure those life challenges. As gate keepers of our children's innocence we must be careful to set a good example, filter what we expose them to, and still remain transparent and sensitive to what our children are feeling in those hard times of change. However, transitions are oftentimes necessary, and gates to new opportunities.

Recently, a church I was attending changed leadership. When we arrived at the church a few years prior, the church was a vibrant, family-oriented , close knit body of believers, led by an experienced elder, who served as senior pastor. However, the transition caused a great falling away and divide among adults. As adults left, with their children, children were separated from friends that they had spent their whole lives with. The church gates were wide open and there seemed to be a mass exodus.

In efforts to bring comfort to and keep unity among the church members, the leadership focused on community and building relationships. I decided to carry this theme into our kids classroom as well. As a teacher, I'm always looking for hands-on-activities to help my students engage in the learning process. I settled on creating a community classroom quilt after reading a post by Kristen Duke of Capturing Joy.

One Sunday I had each student illustrate on fabric squares what they believed their gift to the world is. I worked on the header of the quilt adding in the elements of community emphasized by the pastor. Here is the header:

I chose two different rainbow patterned quilting cotton fabrics to frame the fabric squares and make the bottom of the quilt sandwich. Here is the bottom layer:

I decided to make it a three by three squares tapestry quilt. Here's how it turned out after piecing together everything:

I presented our Gate Kids Community Quilt to the pastor's wife, a photographer and fiercely creative person, as a gift from the class. It served as a commemoration of the church's transition into The Gate, "a place where people will go to, grow in, and become healed."

I think this activity really helped the kids with understanding their own ability to adapt with change. I also believe this activity helped the kids to feel validated because they were affirmed as gifts in the world, who each have a purpose.

What other themes do you think would make a great classroom or community quilt?

In response to the gate writing prompt.